100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems meeting DOT 4 and DOT 3 manufacturers’ recommendations. Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Dry boiling point 245 °C / 473 °F. Wet boiling point 158 °C / 316 °F. Standards: FMVSS 116 DOT 4 & DOT 3; SAE J 1703.
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point 270 °C / 518 °F. Wet boiling point 185 °C / 365 °F. Standards: FMVSS 116 DOT 5.1 NON SILICONE BASE...
Extreme High Performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594°F (312°C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 401°F...
High Performance brake bluid with very high dry boiling point of 617°F (325°C) and wet boiling point of 400°F (204°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for...
DOT 5 Silicone Brake Fluid for use in all hydraulic brake systems and clutches except those using mineral-based fluids
High performance brake fluid.High wet boiling point, more than 165 ° C. Prevents the formation of vapors even under extreme braking load. Provides optimum braking performance and responsible braking. Miscible with DOT 5.1SAE J 1703, ISO 4925
High performance brake fluid for hydraulic brakes.Extremely high wet boiling point with more than 180 ° C. Prevents the formation of vapors even under extreme braking load. Provides powerful and responsible braking. Miscible with DOT 4.SAE J 1703, ISO 4925
Reference: REP 50-1 DOT 5.1
Synthetic brake fluid designed for all types of hydralic braking systems for passenger cars, light commercial vehicles and motorcycles.Use:- for high thermal loads - boiling point higher than 265 ° C- tested under very demanding conditions- Compatible with all brake fluids conforming to SAE standards, DOT 5.1, DOT 4, SAE J 1703, SAE J 1704, ISO 4925 Class...
Reference: REP 50-1 DOT-4
Repsol DOT-4 is a special polyethylene-based product developed for demanding operation and high performance. Recommended for high end vehicles and all types of braking systems requiring a product with this quality level. Do not mix with brake fluid having a different level of product quality, as well as used, it would be necessary to completely replace...
Reference: LI 3085
Brand: Liqui Moly
DOT BRAKE FLUID 4 Synthetic brake fluid based on glycol ethers, polyalkylene glycolsand glycol ether esters. It contains inhibitors thatthey prevent corrosion of metal brake components and reduce oxidationat elevated temperatures. As a result, none can ariseDecomposition products containing acids. It was specially developedfor longer service life of...