No supplier
Reference: F4656-NG1543
Brand: NG
Diameter (mm) : External 256, Internal : 144, Thickness : 4,0, Number of holes : 4, Hole diameter : 10,5
Reference: MDOT4
Brand: Motul
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems meeting DOT 4 and DOT 3 manufacturers’ recommendations. Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Dry boiling point 245 °C / 473 °F. Wet boiling point 158 °C / 316 °F. Standards: FMVSS 116 DOT 4 & DOT 3; SAE J 1703.
Reference: MDOT51
Brand: Motul
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point 270 °C / 518 °F. Wet boiling point 185 °C / 365 °F. Standards: FMVSS 116 DOT 5.1 NON SILICONE BASE...
Reference: F6819-NG1727
Brand: NG
Diameter (mm) : External 298, Internal : 132, Thickness : 5,0, Number of holes : 6, Hole diameter : 8,5
Reference: MRBF660
Brand: Motul
High Performance brake bluid with very high dry boiling point of 617°F (325°C) and wet boiling point of 400°F (204°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for...
Reference: FR142-634DC
Brand: SBS
The upgrade choice for Superbike, Supersport and Superstock racers in National Championship as well as for Track Day ridersHigh-tech carbon compound developed for racing and standard brake systems used for race and sport bikesLow heat transfer rate protects brake system and brake fluid against extreme temperaturesSmooth initial bite, progressive in-stop...
Reference: F5177-NG207
Brand: NG
Diameter (mm) : External 276, Internal : 144, Thickness : 4,0, Number of holes : 4, Hole diameter : 10,5
Reference: MRBF600
Brand: Motul
Extreme High Performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594°F (312°C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 401°F...
Reference: F5923-NG641
Brand: NG
Diameter (mm) : External 276, Internal : 88, Thickness : 4,0, Number of holes : 4, Hole diameter : 10,5
Reference: CMB 6026452
Intensive and fast cleaning, without acetone. It dries quickly. Neutral for rubber, plastics and varnishes
Reference: F10799-07KA13SA
Brand: Brembo
This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.